Jesse Garton Posted October 17, 2016 Report Share Posted October 17, 2016 Hi guys im in need of a VG30DETT base map to get my friends 300 out of my driveway.A set of setting to get it driving will be enoughCheers Quote Link to comment Share on other sites More sharing options...
Scott Posted October 17, 2016 Report Share Posted October 17, 2016 Hi Jesse,PCLink for G4+ comes with a base-map for our Nissan 300ZX plug-in ECU. This will make a good starting point for you.Scott Quote Link to comment Share on other sites More sharing options...
Jesse Garton Posted October 17, 2016 Author Report Share Posted October 17, 2016 Hi ScottWe have loaded the base map. Do we need to run a map sensor and iat or can we run it using the factory sensors? Quote Link to comment Share on other sites More sharing options...
Scott Posted October 17, 2016 Report Share Posted October 17, 2016 Hi Jesse,My understanding is that there is no factory MAP or IAT sensor. You will need to run a vacuum line from the on-board MAP sensor to the inlet manifold. An IAT sensor is recommended for a proper install, this can be connected to the ECU's expansion connector or you can use pin 36, which is the factory fuel temp sensor.Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.