Sutkale Posted October 18, 2016 Report Share Posted October 18, 2016 Did few days ago individual cylinder tuning (fuel) and noticed that only primary injectors are controllable. Any ideas when also secondary injectors can be tuned per. cylinder? Or is this doable at all? Quote Link to comment Share on other sites More sharing options...
Scott Posted October 19, 2016 Report Share Posted October 19, 2016 Can you confirm you are using Sequential/Staged mode and not Group/Staged? To be honest I don't remember testing that combination before.Scott Quote Link to comment Share on other sites More sharing options...
Sutkale Posted October 19, 2016 Author Report Share Posted October 19, 2016 Can you confirm you are using Sequential/Staged mode and not Group/Staged? To be honest I don't remember testing that combination before.ScottHi Scott.I´m using sequential / staged. Since the correction applied only to primaries, had to use quite high numbers to get desired results. Quote Link to comment Share on other sites More sharing options...
Scott Posted October 19, 2016 Report Share Posted October 19, 2016 Hi Sutkale,I've just gone to test this and see the problem you're coming up against, the staged cylinder trim tables do not show. I then read the help and see that this is intentional. I will pass your request on to the engineers.Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.