Nissan - VCT Correction tables

[mack85n]

When setting up switched VCT is there correction tables that you need to enter. The Haltech Pro-Plugin Software for theTB48 has Base Fuel and Timing Correction tables for when the VCT is switched on. How does the G4+ software work in this regard?

I assume it is set-up as a switched out put based on RPM, ECT and TPS like the Haltech though is there corrections that can be entered for each switched output?

Thanks

[Brad Burnett]

You can set those tables up via the 4d fuel or ignition tables.  These can be found in the fuel or ignition tabs under corrections.

You would then select your auxiliary output as the table activation(whichever output is controlling the VCT).

You can then set the table axis to what you desire.  RPM vs TPS, rpm vs MAP, etc.

[mack85n]

You can set those tables up via the 4d fuel or ignition tables.  These can be found in the fuel or ignition tabs under corrections.

You would then select your auxiliary output as the table activation(whichever output is controlling the VCT).

You can then set the table axis to what you desire.  RPM vs TPS, rpm vs MAP, etc.

Thanks, that sounds quite straight forward.