Gibbo Posted December 20, 2016 Report Share Posted December 20, 2016 Gents we have setup shift cut with the TTI Sequential Gear Barrel POT. Due to this being a drift car we need to be able to turn the shift cut on and off via a switch in the cab. I have thought about using a switch to turn off the gear barrel AN Volt input but this will turn off the gear display and as this car is fitted with NOS i don't want it spraying in 1st or second gear.I there another way we can do this and if not available is there a way it can be added into the firm where. Quote Link to comment Share on other sites More sharing options...
Scott Posted December 20, 2016 Report Share Posted December 20, 2016 There is not currently any lockout to disable gear shift control by the driver. I can ask the engineers to consider adding this.Scott Quote Link to comment Share on other sites More sharing options...
Gibbo Posted December 20, 2016 Author Report Share Posted December 20, 2016 There is not currently any lockout to disable gear shift control by the driver. I can ask the engineers to consider adding this.ScottThanks mate it would be much appreciated by us Drift guys and im sure the Rally guys wouldn't mind it also for gravel. Quote Link to comment Share on other sites More sharing options...
Simon Posted December 20, 2016 Report Share Posted December 20, 2016 Under what conditions are you wanting the cut to be turned off? Currently there is a TPS lock out available that will stop it cutting until a set TPS point Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.