Link g1

[Ameer Erasmus]

Hi could you please help with wiring diagram for 20v black top in ae92 

[Simon]

You don't mention which G1 you have but assuming a LEM not a LinkPlus or other. It will also need the correct sub-board to suit the 20V.

 http://forums.linkecu.com/applications/core/interface/file/attachment.php?id=2524

The above covers the generic wiring. Below is specific info for the 20V cas

4AG20V.pdf

 

Note the wire colours might not match as there have been a number of loom changes over the years. You will need to confirm by using the main header pin locations.

Edited January 25, 2017 by Simon

[Linesy]

Hi Simon, That link does not work for the diagram, can you check it out please?

You don't mention which G1 you have but assuming a LEM not a LinkPlus or other. It will also need the correct sub-board to suit the 20V.

 http://forums.linkecu.com/applications/core/interface/file/attachment.php?id=2524

The above covers the generic wiring. Below is specific info for the 20V cas

4AG20V.pdf

 

Note the wire colours might not match as there have been a number of loom changes over the years. You will need to confirm by using the main header pin locations.

Hi Simon, That link does not work for the diagram, can you check it out please?

Also, will a LinkPlus work with any Trigger type or does it need Sub Board specific to Trigger?

 

Thanks

 

[Adamw]

Simon's link works for me but it may be a permissions issue that doesnt let someone outside of Link to download it?  Here are public shared links to the same documents: Manual: https://1drv.ms/b/s!AiYbYlZQuRHPixTQ00erP6j-ZVYV 

4AG20V:  https://1drv.ms/b/s!AiYbYlZQuRHPixVt_NrEOaxVzKuB

The G1 Linkplus still uses the same trigger sub-board.