Llewellyn Posted January 28, 2017 Report Share Posted January 28, 2017 Probably not something a lot of people will ask for but I would love the Tacho to be able to have a little more calibration to be able to get the display absolutely correct. My JZA80 supra calibrated correctly at 1000rpm is almost 500rpm off by 7000rpm I have got mine correct by using a PWM output (table) but I have lost the built in sweep function by doing this. Would love both Quote Link to comment Share on other sites More sharing options...
Scott Posted January 31, 2017 Report Share Posted January 31, 2017 Hi Llewellyn,I'm guessing the 'Multiplier' and 'Tach Duty Cycle' settings have not helped?Scott Quote Link to comment Share on other sites More sharing options...
Llewellyn Posted January 31, 2017 Author Report Share Posted January 31, 2017 Helped yes - got it "right" - no Quote Link to comment Share on other sites More sharing options...
Scott Posted February 1, 2017 Report Share Posted February 1, 2017 Ok thanks. I will ask the engineers to consider this.Scott Quote Link to comment Share on other sites More sharing options...
Davidv Posted February 19, 2017 Report Share Posted February 19, 2017 (edited) +1 for this, I'm using a PWM table too Edited February 19, 2017 by Davidv Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.