Andy Drummond Posted February 13, 2017 Report Share Posted February 13, 2017 Hi TeamIs it possible to Disable the Aux 9/10 Power fault alarm, if both Aux 9 and Aux 10 are OFF (Not in Use)Also for Aux 17-20 power fault alarm.Since increasing Virtual aux to 8, I am using many less actual aux outputs.Since I am not using any actual aux outputs above 8, therefore the +14 Aux 9/10 Red is NOT wired same for Aux 17-20. But I getting these ECU faults all the time, which blinds me to any real ecu faults that may happen.Confirming that +14v Aux 9/10 pin is NOT wired, is ok for good operation of the Link ECU. Hope you understand my request to stop false alarms.CheersAndy Quote Link to comment Share on other sites More sharing options...
Simon Posted February 14, 2017 Report Share Posted February 14, 2017 Hi Andy That should already be the case on latest firmware. Provided the channels are not in use. Quote Link to comment Share on other sites More sharing options...
Andy Drummond Posted February 15, 2017 Author Report Share Posted February 15, 2017 Hi SimonSweetTested and confirmed all good.CheersAndy TechDave 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.