Moudy Posted February 16, 2017 Report Share Posted February 16, 2017 hi guys please help im strugling with this ecu its a plug and play i have jumpered it for 94-2000 and have it as jdm and stil no spark trigger one is working but not trigger 2. This ecu was origanly out of a s15 with a map so shouldnt it atlease have a spark and pulse? Can some one tell me what vipec this is? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 16, 2017 Report Share Posted February 16, 2017 Hi that there is a V44 plugin.You will need to configure to suit the N14 set up in the pin functions of the manualThe ECCS test will also need to be carried out this is covered in the VTS help file. If you find you get a widest slot of 1 then change the dip switch settings to the alternative. Nissan ShortHeader PlugIn Manual.pdf Moudy 1 Quote Link to comment Share on other sites More sharing options...
Moudy Posted February 16, 2017 Author Report Share Posted February 16, 2017 Thanks for your reply simon i have switched the board and jumpers around many times and still no sign. I have followed the instruction and the way the gtir jumpers are ment to be setup(from researching) is jumpers are from 94-2000 and needs to put the switched as jdm. Have no clue what eccs is and vts. Forgive me as my tunest and i was trying to work it out. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 17, 2017 Report Share Posted February 17, 2017 VTS (Vipec tuning software) is the tuning software that you use to tune the ECU.This has a comprehensive help file that will explain the ECCS test function. Moudy 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 17, 2017 Report Share Posted February 17, 2017 Moudy 1 Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 17, 2017 Report Share Posted February 17, 2017 Is the gtir still using a dissy and single coil? Quote Link to comment Share on other sites More sharing options...
Moudy Posted February 17, 2017 Author Report Share Posted February 17, 2017 (edited) Hi thanks for the reply guys ive done all that and still same and ive tried my mates exact sames vipec and it worked fine and yes ducie its still single coil and dizzy why?....would there be no spark if it has a s15 map? Edited February 17, 2017 by Moudy Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted February 17, 2017 Report Share Posted February 17, 2017 Change you ignition mode settings to the same as your mates file. Ignition mode should be set to dissy not multi coil like the S15. Then do the above test Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.