TnF Posted February 21, 2017 Report Share Posted February 21, 2017 Hello guys. Just bought these injectors: http://injectordynamics.com/injectors/id1050x/If you go to the "Plug and Play Data" tab in the page you have some downloads. I know that the ones we are looking for G4+ modelled equation are the GM tables. They have 2 files available:ID1050x GM Characterization Tables – EFI Live – Updated 11-29-2016ID1050x GM Characterization Tables – HP Tuners – Updated 11-19-2016Both have similar data, including Short pulse width adder and other compensation factors. Which ones do you recommend using and are available to use with the G4+ ecus? (i own a g4+ xtreme black) Can you have a look at their excel files? Kind regards Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted February 21, 2017 Report Share Posted February 21, 2017 They both contain the same data.Hp tuners just has a different format when compared to EFI Live. So to make it easier to just copy and paste, ID was kind enough to supply both data sets to ease your copy and paste adventures. Quote Link to comment Share on other sites More sharing options...
Rich RDE Posted February 21, 2017 Report Share Posted February 21, 2017 Use the HP tuners info. It is much easier to understand when inputting the data into the g4+. Use the 0 kpa row in the offset voltage and look at the volts on the left hand side to choose the offset correctly. The small pulse width offset use the correct table of the 2. Copy and paste into the Link G4+ section for small pulse width offset. The rest is pretty easy from there. Hope this helped. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.