Shedley Posted April 26, 2017 Report Share Posted April 26, 2017 (edited) Hello I'm currently installing a Link Fury ECU to a BMW S54 engine with double vanos. The car is up and running, but i keep getting trigger errors at the exhaust cam sensor, that is connected to trigger 2.In runtime values, trigger 2 Is green and OK. Trigger scope seems ok, even when errors are counting up at the vvt screen. I get following faults: 3rd cam tooth and error sync. In the trigger scope you can nicely count 7 tooth and 1 gap, as you can see on the exhaust cam trigger wheel.... Anyone experience with this?I've also seen that the inlet cam can't move lower then 13-14 degrees Edited April 26, 2017 by SVR Autosport Quote Link to comment Share on other sites More sharing options...
Shedley Posted April 27, 2017 Author Report Share Posted April 27, 2017 Did a cam angle test and found that the cam offset from the exhaust have to be 3.6 and inlet 100 degrees, changed this and everything works now! b3tuning 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.