Link G4+ Atom in to Nissan Micra k11 CG10DE

[Roshitha]

Hi,I'm working on a project Nissan micra K11 CG10DE engine and i'm trying to install Link G4+ Atom ECU.

but the problem is My Micra triger patern does not show in the software.also i searched everywhere to download a user manual 

and a wiring diagram for this G4+ Atom but i did not found.if someone can help me on this it would be much appreciated. 

thank you.

[Grant Baker]

We are doing something similar.

There is apparently a similar trigger already in the presets... Hopefully Simon will recall which one it is as I've forgotten!

[Simon]

The Daihatsu Copen 660cc JB-DET has a very similar patter but reluctor based rather than opto.

But this should not be an issue just a case of changing the sensor type to Reluctor when configuring for the Micra

[Roshitha]

Hi,thank you for the quick replies. But will i be qble to run sequential ignition with this trigger pattern 

 

[Adamw]

Yes the ECU will have 720deg sync using this type of pattern so sequential will be possible.

[Antonis Kogkas]

Since I am doing a similar setup. Will this trigger patern also be enough for a Coil On Plug conversion?

[Adamw]

Since I am doing a similar setup. Will this trigger patern also be enough for a Coil On Plug conversion?

yes.

 

[Fintank11]

Hi , did you ever get this going ? Doing the same to mine 

[Richard Hainsworth]

Hey team I and helping a friend wire a monsoon onto the same engine. Does anyone have a pinout for wiring the trigger to the dizzy? We are running Honda k20 cop coils too.

[Adamw]

What's the plug look like on the dizzy?  Does it originally have the coil and ignitor built-in?