Dirtye30 Posted June 17, 2017 Report Share Posted June 17, 2017 I'm going for a tune soon, my sr20 is all wired up etc, but I've put switches in now for Hi/Low boost, launch control, and flat foot shifting (momentary switch on clutch) My issue is I'm no wiring person, I have 2 wires coming of each switch, I need to know what pins do they go to on the ecu (G4 xtreme red) so my tuner can set everything up on the dyno and make it all safe. At the moment, the wires are just chilling dangling about ThanksJesse Quote Link to comment Share on other sites More sharing options...
Simon Posted June 18, 2017 Report Share Posted June 18, 2017 Switches will need to go to a available digital input. Other side can be to ground or 12VFor the flat shift I would make sure this is to Di 1-6 as they are the higher priority inputs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.