zaihas.chan Posted June 23, 2017 Report Share Posted June 23, 2017 (edited) Hi,I was wondering if the OEM knock sensor works with AltezzaLink?And which input does it connected to? Thanks!Zaihas Edited June 23, 2017 by Zaihas Amri Fahdzan Hasfar Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted June 23, 2017 Report Share Posted June 23, 2017 yes it works.its connected to knock1simply turn knock control to "on-internal" and follow the instructions in the help file for configuring knock control Quote Link to comment Share on other sites More sharing options...
zaihas.chan Posted June 23, 2017 Author Report Share Posted June 23, 2017 (edited) Thanks for the info Brad!Anyhow, i still confuse about the connection (Knock1). What i thought was analog input (which i'm not sure which AN input) need to be set to function "knock (0-5V)". Then only turn on knock control to "on-internal" to enable internal knock circuitry. Is it the analog pin function assignment is not needed? Edited June 23, 2017 by Zaihas Amri Fahdzan Hasfar Quote Link to comment Share on other sites More sharing options...
zaihas.chan Posted June 24, 2017 Author Report Share Posted June 24, 2017 Nvm. i think i figured it out. It is dedicated input no assignment needed. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 25, 2017 Report Share Posted June 25, 2017 Nvm. i think i figured it out. It is dedicated input no assignment needed.Exactly. Knock are dedicated inputs, no assignment needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.