Jump to content

M50B20 wiring to link g4+ storm


Recommended Posts

Greetings all,

I am currently wiring a 6 cylinder m50b20 with 153624 firing order, to a link G4+ storm "blue one" what would be the best wiring for ignition, injection?

what is did is 153 to inj port 1 and 624 to inj port 2 and did put 2 ignitors to every three coils.

setup multiport with 1-2 INJ ports and 1/2 injection cycle.

Is there anything better to do ? shall I used coils with built in ignitors? 

Recommendations highly appreciated

Link to comment
Share on other sites

In that case you are correct for the injection wiring.

The coils will need an igniter channel per coil and you will pair the input to the igniters to suit the firing order.

I would run the injection rate at 1 / cycle.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...