StijnFSP Posted July 9, 2017 Report Share Posted July 9, 2017 Hi i got a g4+ pnp for subaru impreza my 97 -98 got can lambda kit wired in and working reads lambda good cl lambda works on stoich mode but not auto mode.got latest firmware etc any ideas ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 10, 2017 Report Share Posted July 10, 2017 Auto mode should be enabled on the plugins as far as I know. Can you please attach your map here or email it to and we will take a look. Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted July 10, 2017 Author Report Share Posted July 10, 2017 added the file Stijn anti lag lc wideband can wmi Cl loop auto mode.pclr Quote Link to comment Share on other sites More sharing options...
Simon Posted July 10, 2017 Report Share Posted July 10, 2017 Check your settings for MAP Delta and TP delta lock out.On the current settings the control will be lock out under almost all conditions Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted July 11, 2017 Author Report Share Posted July 11, 2017 What would u suggest to have it working all the time this is my first auto mode setup thnx already for the help Quote Link to comment Share on other sites More sharing options...
Simon Posted July 17, 2017 Report Share Posted July 17, 2017 (edited) Big numbers will cause it to run all the time but that is not desirable as you want the CCL locked out during transients.I would suggest typical settings of 4Kpa for map and 5% for TP Edited July 17, 2017 by Simon Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted July 24, 2017 Author Report Share Posted July 24, 2017 thnx sorry for the late rely but everything works great now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.