Jump to content

2JZ GE VVTI wiring and basemap "link monsoon"


Recommended Posts

  • 3 years later...

Hallo everybody,

i've strated tuneing my first 2jz vvti stock cams, efr8374, with g4+ storm, i have a question on right PID vvti sttings:

is default settings valid? engine run well but when iI active vvti it start dumping around target positions as if PID gain is too high or filter introduce too much retard on this ocntrol.

 

this is log of my first attemp at idle.

Oil pressure is good 4-5 bar @ 56°C at 1100 rpm

Does anyone have experiance about this?

tks

bye

image.thumb.png.49a54a7b0099417c14cf63c10b2112ac.png

image.png

Link to post
Share on other sites

I have had this on a 2JZ before too, they seem to be sensative to oil viscosity or something as I have also had them work well with the default PID.

In the case of the one that didnt work well for me the only thing I needed to change was set PID to custom and reduce the proportional to 4.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...