Jump to content

CAN to AIM MXG dash


Gctech

Recommended Posts

Hello 

Im trying to setup CAN communication from G4+ Fury to Aim MXG dash , The MXG only supports the old G4 and Vipec systems , I managed to connect using the g4 500k option with in the MXG and setting up CAN2 to 500k generic dash 10hz and id of 1000 as describe in the manual ,data does display but the values are wrong other than RPM, Does the new G4+ still use the same CAN protocol as the old units? 

thanks

Base map mk5.pclr

Edited by Gctech
Link to comment
Share on other sites

Hi , 

I have a similar problem , all data working well on the mxg beside the fuel pressure and oil pressure , i have contacted AIM , they reply that there is a issue on the latest firmware and that they are addressing problem resolve on the next firmware update. 

Teong

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...