Jareds Posted July 25, 2017 Report Share Posted July 25, 2017 Hi All.Long story short, I have tuned and been driving my 2006 Subaru STI (ADM model) for a while now. I have since found that out that the actual OEM MAP sensor being used is that from a 08+ Subaru STI. I am however using the default Link Subaru V9 MAP sensor scaling. To my knowledge the factory ECUS on the 2006 STI vs the 2008+ STI do definitely run a different scalings and offset in the OEM mapping.Any idea how I can get the relevant scaling info on the 06 vs 08+ OEM map sensors, or can someone confirm the best thing to do here?Definitely not looking forward to retuning the vehicle if the scaling has to change! But my main concern is what has my peak boost been to date! Thanks,Jared Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted July 25, 2017 Report Share Posted July 25, 2017 Is the sensor set to the correct max kpa? does it read within 5kpa of the internal barometric sensor, if so all good as most sensors are linear. Quote Link to comment Share on other sites More sharing options...
Jareds Posted July 25, 2017 Author Report Share Posted July 25, 2017 Is the sensor set to the correct max kpa? does it read within 5kpa of the internal barometric sensor, if so all good as most sensors are linear.Im relying on the default Subaru V9 scaling thats available in the G4+ unit - no idea what this curve / how the scaling is done.I havent compared o the internal barometric sensor - however i did do a MAp sensor calibration once upon a time! The fact of the matter is that there is clearly a difference between the OEM 06 and the 08+ STI MAP sensors - Below are the Offsets and multipliers as stated in the OEM maps in terms of the MAP sensor calibrations:06 STI - Offset (psia) = -8.005. Multiplier (psia/v) = 9.94308+ STI - Offset (psia) = -5.666. Multiplier (psia/v) = 9.943How this info relates to a linear curve I cant say. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 25, 2017 Report Share Posted July 25, 2017 The data that you quote for the 06STI sensor above matches the Link Cal "Subaru (V7-8)".The data that you quote for the 08STI sensor above matches the Link Cal "Subaru (V9)".I would expect since there is quite a big "offset" difference between these two that the MAP sensor calibration routine wouldnt have successfully completed if you chose the wrong sensor type. Quote Link to comment Share on other sites More sharing options...
Jareds Posted July 25, 2017 Author Report Share Posted July 25, 2017 The data that you quote for the 06STI sensor above matches the Link Cal "Subaru (V7-8)".The data that you quote for the 08STI sensor above matches the Link Cal "Subaru (V9)".I would expect since there is quite a big "offset" difference between these two that the MAP sensor calibration routine wouldnt have successfully completed if you chose the wrong sensor type.and THIS is the answer I was hoping for! THANKS ADAM! No retuning for me! haha. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.