fakethinkpad Posted August 4, 2017 Report Share Posted August 4, 2017 (edited) With the PnP G4 for a Nissan R34 GT-R, does the ECU output the CAN data as setup in the ECU settings to the OEM Nissan Consult plug? or does the ECU only output the CAN data to its own pinout?Essentially what I'm trying to achieve is using the Consult plug to OBD2 adapter cable and using a ELM327 (2.2) read the CAN data off the ECU and let Torque Pro read this. I'm aware the CAN data support is limited with the ELM327/Torque Pro. Christian Edited August 4, 2017 by fakethinkpad Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted August 4, 2017 Report Share Posted August 4, 2017 Same (ish) question just been asked here: http://forums.linkecu.com/index.php?/topic/6288-obd2-bluetooth-reader-and-torque-app/#comment-50403 Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 5, 2017 Report Share Posted August 5, 2017 I did talk to Christian on tech support webchat last night about this subject. The G4 & V series ECU's did not have OBD2 data output. As far as I know the only CAN that the Torque app can read is OBD2 type protocols. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.