Schiwaa Posted October 19, 2017 Report Share Posted October 19, 2017 Hello there, i have gotten my hands on a G4+ Plug n Play ECU for an EVO8. Now i have a problem with connecting it to my PC. If you look at the attached pictures you can see the ecu circuit with the label USB, but where can i connect my CUSB (Tuning) cable? The CUSB has a different looking plug. Am i missing a plug on the ECU and if im missing one can i buy it somewhere or craft it myelf? Thanks for your help guys Alex Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted October 19, 2017 Report Share Posted October 19, 2017 There is about a 6 inch cable that comes with the ecus that goes from that connector on the board to the CUSB cable. Definatily something I would recommend getting from link. May have to go direct as that usually comes with the ecu so many dealers may not have. Schiwaa 1 Quote Link to comment Share on other sites More sharing options...
Schiwaa Posted October 19, 2017 Author Report Share Posted October 19, 2017 Do you know where i can buy this cable, preferable in Germany? Haven't found it on any link dealer site. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 20, 2017 Report Share Posted October 20, 2017 The cable you are missing has part number #CANPCB. This is what it looks like: http://dealers.linkecu.com/CANPCB_2 You can search for a local dealer here: http://www.linkecu.com/dealer-network/ Most dealers would not have this part in stock but our UK warehouse has them in stock so it wont need to travel too far. Schiwaa 1 Quote Link to comment Share on other sites More sharing options...
Schiwaa Posted October 22, 2017 Author Report Share Posted October 22, 2017 Thanks for your help, going to order one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.