NZ Mikey Posted November 3, 2017 Report Share Posted November 3, 2017 Hi recently purchased link g4 fury cars all wired up and ready to install ecu i would like to know how hard is it to configure the ecu i would like to get the car running before i take it to tuner as i live far away from my chosen one heres an attached copy of my io table with the list of inputs and outputs car rb25det neo r32 basic mods garrett t3t4 front facing plenum 800cc injectors and all the rest supporting mods or is anyone in the south auckland region that is able to set this up for me cash paid? MIKEY R32 IO TABLE.pdf Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 3, 2017 Report Share Posted November 3, 2017 Its a bit quiet in Tech support tonight so here is a starting point. After loading this you will need to calibrate TPS and MAP sensors, check base timing with a timing light. Check all other sensors read correct. You may need to adjust master fuel number up or down a bit to get it to run. I have set up 2 boost tables to be switched by your boost switch but I have left zeros in both tables for now so both should just give you spring press. I notice you have no idle valve in your IO list. RB25DET Neo Fury.pclr Quote Link to comment Share on other sites More sharing options...
NZ Mikey Posted November 3, 2017 Author Report Share Posted November 3, 2017 thank you exactly what i was after Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.