Leon Posted December 17, 2017 Report Share Posted December 17, 2017 hi, i have a new link monsson which i had wired to my 13b by my local sparkie, it has spark but no injector pulse on crank, injectors will trigger on test mode, i rang link and because im using a s4 13b i have altered trigger 1 and trigger 2 to suit but still no joy, any ideas would be appreciated , cheers Quote Link to comment Share on other sites More sharing options...
Shedley Posted December 17, 2017 Report Share Posted December 17, 2017 Do you gave a pcl file? Maybe some settings are Wrong Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 17, 2017 Report Share Posted December 17, 2017 Are the injectors high impedance? Probably the first place to start is to open up the runtimes screen (F12), take a look at the triggers/limits tab while cranking. We want to see trig 1 & 2 signal turn green, check eng speed reads about 200RPM and check there are no red errors showing. Quote Link to comment Share on other sites More sharing options...
Leon Posted December 17, 2017 Author Report Share Posted December 17, 2017 yes the injectors are high impedance, cool cheers will plug it in after work and check the settings, thanks for the replys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.