Jump to content

G4+ Storm black knock wiring


Recommended Posts


Just sorting out my pin out table before wiring in and am confused about the two knock channels to use for this ECU.  The  B looms I have, have the 2 dedicated pins in the top right , a 400 mm  B loom both are white/purple while a 2.5m  B loom I also have, are both white...Colour differences aside, the header pin out diagram for the G4+ Storm Black from PC Link help ,clearly indicate the two pins as knock 1 and 2 respectively.

However...looking at the "Knock inputs" section in help for the Storm Black, it says to use pins AN Volt 2 and DI 4 to set up internal knock detection?

Which ones do I use?



Link to comment
Share on other sites

Yes the Storm Black has 2 dedicated knock pins on the B connector so these are what you need to use.  The note in the help file you refer to looks like a mistake, it is actually for the old blue storm which didnt have dedicated pins.

I see that note has been corrected in the latest test version that I'm using now so it will be fixed soon.  Sorry for the confusion


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...