dan7773 Posted March 15, 2018 Report Share Posted March 15, 2018 Hi all, Going to be really cheeky and see if anyone’s got a base map for a 2jzgte non vvti with sard 650cc injectors I could use. Ive got the car cranking wants to fire but somethings not right, tested the injectors, coils etc all works, just when I crank, on the aux channel panel, it’s telling me the injectors and ignition are off, even when I’m testing them. Pretty sure all settings are correct, atm all I’ve done is download the Supra base map for the extreme and change the injector sizing, aux, analog, digital inputs etc. Thanks Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted March 15, 2018 Report Share Posted March 15, 2018 did you calibrate your trigger ? Quote Link to comment Share on other sites More sharing options...
dan7773 Posted March 16, 2018 Author Report Share Posted March 16, 2018 Hi, Calibrated triggers, on the extreme Supra basemap it has a different trigger setup than what it lists on the engine specific information for the 2jzgte. On trigger 2 filtering level is level 1 instead of level 2. Also would it mater what one of the Cam sensors I’m using cam sensor 2 as per the Supra link pinout. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted March 16, 2018 Report Share Posted March 16, 2018 Yes it will matter which cam sensor you are using. Typically both will work(just different trigger reference angle). But i have experienced trigger issues with one of them(cant remember which one) that would have the crank and cam signaling at the same moment at varying rpms under load and it would throw things out of wack. Sounded like hitting limiter but it was not. Quote Link to comment Share on other sites More sharing options...
dan7773 Posted March 16, 2018 Author Report Share Posted March 16, 2018 I’m not getting any trigger errors or anything, says triggers are ok, it wants to fire, but need to crank for so long it’s just flooding engine now. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted March 16, 2018 Report Share Posted March 16, 2018 Are you using modelled or traditional fuel mode? Quote Link to comment Share on other sites More sharing options...
dan7773 Posted March 17, 2018 Author Report Share Posted March 17, 2018 Was using modelled, Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 17, 2018 Report Share Posted March 17, 2018 Can you attach your map, I'll take a quick look. Quote Link to comment Share on other sites More sharing options...
dan7773 Posted March 17, 2018 Author Report Share Posted March 17, 2018 Got it, changed from modelled to traditional fuel mode and after a lot of cranking finally fired and now ideling perfectly, I can finally get a decent nights sleep, this has been driving me mad. Had to play around with the fueling a little bit but got there. Thanks for your help people, greatly appreciated. It’s good to know that there’s lots of people on this forum that are willing to help, one of the main reasons I went for a link ecu. Was running a hks fcon before and trying to get help and info of people was a complete nightmare. Cheers, Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.