Dynodom Posted May 1, 2018 Report Share Posted May 1, 2018 Hello Is it possible to display the exhaust gas temperature by the means of oxygen sensor heater current (Link CAN O2) in G4+ ? OEM ecu's nowadays often provide this function. Please advise, thank you. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 1, 2018 Report Share Posted May 1, 2018 I thought you would only be able to determine sensor temperature from heater current? The sensor temperature is already available as a parameter in PC Link (Lambda 1 Temp), but it is controlled to 780°C so it shouldnt deviate from that much under most conditions. Quote Link to comment Share on other sites More sharing options...
Dynodom Posted May 1, 2018 Author Report Share Posted May 1, 2018 Hi Adam, Yes, if I have heater current I can determine the approximate temperature. Can G4+ display the heater current form the O2 CAN module ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 1, 2018 Report Share Posted May 1, 2018 Sorry no, below is the only data that the CAN Lambda transmits: Full manual is here: http://linkecu.com/documentation/canlambda.pdf?vid=ynxirA4lAnQKmUiM&chrole=17&ck=0s_mbrJpAqTjD0g6&cktime=158161&cart=20519&promocode=&promocodeaction=overwrite&shipmeth=1852&gc=clear Quote Link to comment Share on other sites More sharing options...
Dynodom Posted May 1, 2018 Author Report Share Posted May 1, 2018 thank you Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted May 1, 2018 Report Share Posted May 1, 2018 You can see the Lambda's temperature in PCLink you just cant use it as a variable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.