Honda k20 coils

[Hx30power]

Hi all please can someone help me with an issue I have?. I have a link g4+ on my boosted civic. Which I have fitted k20 ignition coils. When I test and crank the coils the fire the plugs but when I put my timing light in line r to the plug my light does not flash I have now tried 3 lights all work on other cars. It's the first start up since the build and cannot set ignition timing. Also I have a trigger wheel installed on the crank. Thank you in advance. 

[Adamw]

6 hours ago, Hx30power said:

but when I put my timing light in line r to the plug my light does not flash

Can you confirm how you are connecting the timing light?  Are you using a temporary HT lead between the coil and plug?

If it was using the original honda distributor/coil before the change to K20 coils, have you changed the spark edge to falling?

[Hx30power]

Thank you for the response. 

I have removed the coil and put a temp ht lead fro. The coil to the plug with the clamp in line. The set up is falling. Ignition delay 65us and the dwell is 1.0ms.

[Adamw]

1.0ms dwell might be a bit light.  Try a dwell table more like below.  You could also open up the plug gap temporarily to get make a bigger spark which should help trigger the timing light.:

[Hx30power]

I'll try that thank you