Henkw Posted May 28, 2018 Report Posted May 28, 2018 Hi I've selected inbuilt map sensor in anv5 and set to 4 bar but it's staying at 14.5 psi even if I do a calibration when I apply vacuum to the map it goes down fine and also goes up when I put pressure in it but I thought it should start from 0 and work it's way up and down from that value?please help. Quote
Adamw Posted May 28, 2018 Report Posted May 28, 2018 MAP is an acronym for Manifold Absolute Pressure. 14.5psi is normal atmospheric pressure. 0psi would be an absolute vacuum and is impossible. You can use the parameter MGP (Manifold Gauge Pressure) if you want to read manifold pressure in relation to the atmosphere. Henkw 1 Quote
Henkw Posted May 28, 2018 Author Report Posted May 28, 2018 Sweet so I'm not going crazy,thanks a lot. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.