Smarttech Posted July 13, 2018 Report Share Posted July 13, 2018 Hi, is there a base map available for the cosworth yb engine for the G4+ fury Ecu as I would like to be able to fire the engine up to check everything is ok and no leaks anywhere before booking it in to have it fully mapped. Quote Link to comment Share on other sites More sharing options...
Woody Posted July 13, 2018 Report Share Posted July 13, 2018 You need a bit more info , trigger set up , injector size etc , you can then build a start up map easy enough , have you been through the input and outputs to make sure all is working ok ?? cheers Keith Quote Link to comment Share on other sites More sharing options...
Smarttech Posted July 13, 2018 Author Report Share Posted July 13, 2018 36-1 crank pulley, coil on plug, ID1050x injectors, t34/63 turbo. Not plugged the Ecu in yet as thought I needed some form of base map loading on it first. I quit good with a spanner but when it comes to Ecu maps and the electronics side of things I have never go involved with any of it so it's all a new learning curve for me as to where to start and what to do. Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted July 14, 2018 Report Share Posted July 14, 2018 Clint at BHP has done these, he's on the forum too so maybe he'll pop up. Quote Link to comment Share on other sites More sharing options...
Adturb Posted July 16, 2018 Report Share Posted July 16, 2018 I'm down in Pulborough, far from a pro, but have been playing with Link for a while on my Evo. Happy to give you hand if you're just wanting to get the car running- and would be helpful as I keep trying to get my mate to let me rip out his P8 ECU and fit a Link. Drop me a PM if you want, no hassle if not :-) Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted July 16, 2018 Report Share Posted July 16, 2018 We have done over 60 Cosworth installs and have a superb map that will only need a tweak on the dyno for your car saving a lot of cost in dyno and mapper time, however we like to fully support our customers, if you purchased the ECU from us online the base map and full technical support including a team viewer session is available free of charge. If not we have a support product you can purchase, you are more than welcome to ring and talk to us about this and make sure you are happy with what we offer, 01474 853219 https://shopbhp.com/collections/link-ecu-accessories/products/link-g4-ecu-support-base-map-service Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted July 16, 2018 Report Share Posted July 16, 2018 Hi Where are you based? Quote Link to comment Share on other sites More sharing options...
Smarttech Posted July 17, 2018 Author Report Share Posted July 17, 2018 6 hours ago, Grant Baker said: Hi Where are you based? Hi, I'm based in Sussex and spoke to your company yesterday. Was told Grant will give a call on Wednesday to discuss this. Quote Link to comment Share on other sites More sharing options...
AbbeyMS Posted July 24, 2018 Report Share Posted July 24, 2018 Abbey are in Surrey and Mark the owners lives in Sussex, give us a PM sure we can sort something Quote Link to comment Share on other sites More sharing options...
Adturb Posted August 1, 2018 Report Share Posted August 1, 2018 Did you get it sorted in the end? Quote Link to comment Share on other sites More sharing options...
Smarttech Posted August 2, 2018 Author Report Share Posted August 2, 2018 On 8/1/2018 at 3:07 PM, Adturb said: Did you get it sorted in the end? Grant Baker is on the case as that who is going to be doing all the mapping and adding a few more nice features that the Ecu can run. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.