jetape Posted July 20, 2018 Report Share Posted July 20, 2018 This may sound a little weird but is there a way to delay how quickly WOT is reached after 100% throttle is requested? I'm thinking of a way to add a kind of launch control on a jetski. If you just smash it wide open from stand still it will bounce off the rev limiter couple of times. What I'd like to happen would be when 100% throttle is requested it would translate to 60% right away, then a short delay and up to 100% It doesn't really sound possible from what I've seen in PCLink but maybe there's another way to accomplish what I want. There is no speed input available short of adding a gps sensor. Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted July 20, 2018 Report Share Posted July 20, 2018 Use a second E Throttle Target table Use a combination or a Launch Switch a Virtual Aux and a Timer. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 20, 2018 Report Share Posted July 20, 2018 you could easily just set the e throttle table up so that at lower rpm where 100% ap only equals like 60% tp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.