Tan Yee Ann Posted September 5, 2018 Report Share Posted September 5, 2018 what trigger setup for this signal??? help engine not start table without trigger setup engine k3 ve Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 5, 2018 Report Share Posted September 5, 2018 We don’t have a trigger pattern that will work with 36-2 crank and 4-1 cam. Yesterday when I talked to you, you said it had 3 evenly spaced teeth which would match the 1jz vvti. Usually this engine has 36-2-2-2 and uses the Subaru quad pattern but you claim yours has a different crank wheel. I think you need to get us an oscilloscope capture of your engine cranking so we see what you really have. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 5, 2018 Report Share Posted September 5, 2018 The 3SGE VVTi might work as this is a 36-2 on the crank and then 3 teeth on cam (4-1) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.