Bikeyourride Posted September 11, 2018 Report Share Posted September 11, 2018 Hey boys. I'm in need of some kind of base map for a s13 ka24det with the atom G4+ Stock ka24de with stock sr turbo and injectors. 2.5 link bar. Cant seem to get it started. I can get both triggers set up and etc. But I can't seem to able to find my Timing. Again, I'm a new to the links. If anyone could point me in the right direction. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 12, 2018 Report Share Posted September 12, 2018 Is there realistic RPM displayed in software when cranking ~180-250RPM? Quote Link to comment Share on other sites More sharing options...
Bikeyourride Posted September 12, 2018 Author Report Share Posted September 12, 2018 Adamw, i do have rpm readings when cranking. Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted September 12, 2018 Report Share Posted September 12, 2018 1 hour ago, Bikeyourride said: Adamw, i do have rpm readings when cranking. post your map so we can see if we find something odd. if everything is correct it should be just take some time setting up the fuel more than the timing (almost anything from 5-15 degree should do it). Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted September 12, 2018 Report Share Posted September 12, 2018 From the initial post, it appears that he may be having trouble syncing the ignition timing for the triggers. Would that be correct @Bikeyourride? Bikeyourride 1 Quote Link to comment Share on other sites More sharing options...
Bikeyourride Posted September 12, 2018 Author Report Share Posted September 12, 2018 . Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 13, 2018 Report Share Posted September 13, 2018 4 hours ago, Bikeyourride said: hope I posted the right log? That log is from a running engine. Can you confirm what the problem is. What do you mean by "cant find my timing"? Is this when doing the trigger calibration? Can you attach your map too (.pclr file). Quote Link to comment Share on other sites More sharing options...
Bikeyourride Posted September 13, 2018 Author Report Share Posted September 13, 2018 16 hours ago, Adamw said: That log is from a running engine. Can you confirm what the problem is. What do you mean by "cant find my timing"? Is this when doing the trigger calibration? Can you attach your map too (.pclr file). sorry I think I figured the log out, I hope. I just cant seem to get it running. ill give you my story i bought the turbo kit/ the atom G4+ off some dude off kijiji. Said the atom already had a tune on it for the ka24de with the setup. Can't find the tune anywhere on it. So I started to make my own. Knowing I'll have to put it on the dyno to get true tune. So pretty much put all this junk on the ka that ran flawlessly. Now i can't get to stay running. Had a few pitter and patters when playing with the timing on the atom. Hope I got the right one? captains log.csv captains log.llg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.