StijnFSP Posted October 5, 2018 Report Share Posted October 5, 2018 hi , i'm runiing a g4+plugin v7-9 on a rally car but with no oem dash i have the dash 2 pro installed all working fine but i've installed a DCCD controller and it needs rpm signial i wirred the aux 4 directly through the dccd controller without the oem dash but i dont receive any signial is this caused because i dont have the oem dash installed ? because with the speed signial it was that problem . thnx in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 5, 2018 Report Share Posted October 5, 2018 If your bottomboard is V1.7 or later it will not have aux 4, the tacho pin will be controlled by ign 5. Set aux 4 to off and set ign 5 to tacho. Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted October 10, 2018 Author Report Share Posted October 10, 2018 Ok thnx will try that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.