Jump to content

Can Lambda problem

Ryan Jerard

Recommended Posts

We are running a G4+ with the Link CAN Lambda kit, sometimes works ok, eg ... .97 - 1.0 at cruise. Then for no apparent reason it will shoot to 4.500 give or take a shit load. This is clearly not correct. We scoped the sensor yesterday, waited for the reading to piss about to check the sensor output while the problem occurred and the sensor checked fine.

All the connections seem to be ok either side of the Link Can Lambda unit. Any ideas? Has anyone had issues with the Link Can Lambda unit?



Link to comment
Share on other sites

If the CAN lambda is the only device on the bus make sure you have a terminating resister fitted at the unit.

Also make sure the unit has a nice clean power supply as they do play up if the supply is overly noisy  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...