Jump to content

1jz vvti vvti inlet target


Recommended Posts

Posted

Storm ecu 1jzvvti injector 850cc and coil use igniter 2jz no vvti....dwell control table for using igniter 2jzgte no vvti? Setup vvti for 1jzvvti and table vvti inlet?

170CCC91-D6E8-4394-ABA7-DEEF1F45E0D3.jpeg

Posted

I'm not really sure what your question is. The shape of that vvt table is roughly correct. Generally this will line up with your torque curve. The numbers look far too high though. max mechanical advance is 35 or 40 on these I think. That means anything over 40, will give you 40. With that in mind, this table would run the cam at max advance everywhere from 1500rpm to 5000rpm which is probbaly not what you want. Try multiplying the entire table by 0.75 and that should put you more in the ballpark.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...