Ian6 Posted January 2, 2019 Report Share Posted January 2, 2019 Hi, I wondered if I could get any assistance from any one on this forum. I have a G4+ in an evo and I cannot get the LC to deactivate when not needed. I is still activated on idle (0% TP) and won't disarm after the set RPM limit. Thanks Quote Link to comment Share on other sites More sharing options...
434josh Posted January 2, 2019 Report Share Posted January 2, 2019 Well it's set to Always On with a disarming speed of 35 mph. I would assume it will always be active below 35 mph based on those settings. I would make the TP low be above 0%, like maybe 10%. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 2, 2019 Report Share Posted January 2, 2019 You didn’t post the most important bit - the launch rpm table. Also make sure you have a non driven wheel speed set up in the chassis and body menu. Quote Link to comment Share on other sites More sharing options...
Ian6 Posted January 3, 2019 Author Report Share Posted January 3, 2019 Hi, Thanks for your replies. I have already adjusted the disarming speed and the TP low but there is no change. Below is the RPM table however the problem is that I am no having a Non driven wheel reading as I have only set up the LF wheel speed. Could assist me in setting up the Non driven wheel? Thanks Quote Link to comment Share on other sites More sharing options...
Ian6 Posted January 3, 2019 Author Report Share Posted January 3, 2019 Hi, managed to set up the the non driven wheel as speed source and it is working fine. Thanks for you r help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.