lgwg Posted March 24, 2019 Report Share Posted March 24, 2019 Hi All. I have pinout questions about the EVO4-8 plugin ECU. Here may some typo in the manual from Link website. For the EThrottle ver1.5. I can see AUX4 at the Expansion Connector1(page 12) and DI10 at pin46 (Page25), but if you use the help function in the PCLink Engine Management software, it shows DI10 at Expansion connector 1 and the there's empty pin at pin46. Which one is correct? This situation also happen at the ver1.3 Page10 in the manual from Link website, DI10 at Expansion Connector1,but in page22, DI10 also in pin46. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 24, 2019 Report Share Posted March 24, 2019 Di10 is on pin 46 and on the late E throttle boards is not on the main XS connectors. (note the XS connectors are labled on the PCB for function) Aux 4 is on the 2nd XS connector but this can not be used if you are going to use E throttle. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 25, 2019 Report Share Posted March 25, 2019 I think you must be using an old version of PC Link. The pinout is correct in the help file for the latest 5.6.6 version. Quote Link to comment Share on other sites More sharing options...
lgwg Posted March 25, 2019 Author Report Share Posted March 25, 2019 Dear Simon and Adamw. Thanks for your kindly reply, I got it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.