Guest |814| Posted January 31, 2011 Report Share Posted January 31, 2011 Hello, I've got the Vi-Pec V1-2 subaru pnp ecu which needs going into my MY99-00. I've made a harnas but have a question about the IACV. The MY94-96 has 2 pins for the "idle air control solenoid valve" (open, close) where the 99-00 has 4 input pins. (stepper) How do you wire this for it to work? Peter Quote Link to comment Share on other sites More sharing options...
Guest |814| Posted February 20, 2011 Report Share Posted February 20, 2011 Anybody here has a solution? Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 20, 2011 Report Share Posted February 20, 2011 Auxiliary outputs 5,6,7 and 8 must be used to control a stepper motor idle valve. No other outputs can be used. On the version 1-2 plugin ECU these outputs are used for, Fuel Pump Relay A/C control Purge Solenoid CE light Quote Link to comment Share on other sites More sharing options...
Guest |814| Posted February 23, 2011 Report Share Posted February 23, 2011 Thank you. I've adjusted the wiring. Can I load the default map for the MY99-00 included in the software and try to start it? (Just to make sure it works) Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 23, 2011 Report Share Posted February 23, 2011 Yes you can use the 1999-00 map. The inputs and output will be different to what you have now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.