[1jz storm base map needed]

I've found the problem,there was an issue with the igniter,put a new one on and it's running like dream.

thanks for the help Guys

[1jz storm base map needed]

The rpm is around 170 when cranking the base timing is spot on when checking with a test light,the injectors are clicking when testing also pulled the rail of to make sure fuel was coming out which it was,whenever I try doing an ignition test nothing seems to happen but when I crank it over it's definitely sparking,got it running ish today but it sounds like it's running on 4 cylinders and it does spark on all plugs

[1jz storm base map needed]

This is the map I'm using,the injectors I'm using are high impedance 650cc side feed and fpr is set at 40psi

SOARER WHITE.pclr

[1jz storm base map needed]

Can anyone help me with a base map for my engine I've tried using a supra one and modifying to my specs but can't get it to run engine is standard 1jz running Mitsubishi wasted spark and running multipoint group inj 1-2 also has standard tps and using build in map sensor as it's a G4+ storm and a link inlet air temp sensor.any help would be highly appreciated.

[G4+ storm inbuilt map sensor reading]

Sweet so I'm not going crazy,thanks a lot.

[G4+ storm inbuilt map sensor reading]

Hi I've selected inbuilt map sensor in anv5 and set to 4 bar but it's staying at 14.5 psi even if I do a calibration when I apply vacuum to the map it goes down fine and also goes up when I put pressure in it but I thought it should start from 0 and work it's way up and down from that value?please help.