FredMendes
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by FredMendes
-
-
On 4/19/2021 at 11:51 PM, Adamw said:
The 300Z plug-in ecu doesnt have the Aux 9/10 pins available for direct E-throttle connection. You can use the external module or if you havent purchased the ecu yet your dealer could place a special order with Link for one to be hand modified with some flying leads added to make aux 9/10 available.
Thanks Adam.
Would it be possible to either use 2 external modules or to hand modify to control 2 e-throttles?
-
-
7 minutes ago, Steve said:
If i remember correctly you cant see oil pressure as its not really an obd2 pid.
But if you set up a good safety around oilpressure in the ecu you are golden anyways.
Sounds like this should work out for you.
Btw its much faster than the cheap ebay adaptors out there.
You are refering to the mx+ right?
-
1 hour ago, Steve said:On 3/6/2019 at 11:22 AM, Steve said:
.
Steve i want just so i can see some info:
Afr
Oil/air temp
Oil pressure (is this even possible?)
Boost
That should be enough for me.
I guess no need to be lightning fast because the ecu should be way Faster than the driver and put the car on safe mod before i even check.
-
On 3/6/2019 at 11:22 AM, Steve said:
Yes android. G4+ works with obd2 so yes.
As for lag there wil always be SOME. But its not bad..
Steve when you say its not bad, can you accurately see rpm or afr?
-
8 minutes ago, Steve said:
Obdlink MX+ Is a pretty darn good one
Android? With G4+? No lag?
-
Sorry to dig this One up.
I was wondering for what bluetooth dongle i should go without being laggy. Any conclusions or new insights?
Will be using android.
-
Awesome. Thanks man
-
I thought i would need 2 on the rear wheels (rwd car) only no? Only one and the other wheel may slip.
Also is there any attention to the number of teeth regarding ecu compatibility?
-
On another note. Traction control trough a wheel Trigger sensor, also possible with link G4+?
-
Link G4+ 300z plug and play, going for a crank wheel Trigger (custom made).
Will a 36-1 wheel trigger work fine?
On another note. Traction control trough a wheel Trigger sensor, also possible with link G4+?
Thanks
DBW on a 300zx g4x
in G4x
Posted
Thanks again.
Allready spoke with one of your dealers to have one ECU modified.
Will decide later on if going 1 e-throttle or 2 with the external controler.
Currently have 2 expansion looms for:
2egts2, iats, Oiltemp, oil pressure, Boost, 2x , water temp, 2 widebands. Should be enough no?