[Installed a n350x g4x plug n play on a nissan 350z but the ac stopped working]

 

On 1/20/2022 at 8:38 PM, Timboj said:

Did that work for you? I'm getting the same low pressure lockout on the latest firmware.

yea worked perfectly

[Installed a n350x g4x plug n play on a nissan 350z but the ac stopped working]

13 minutes ago, Adamw said:

Actually, Vaughan has just fixed the calibration in the firmware.  I will send you a PM with a new PC Link and firmware you can load and try. 

ok ill try that

[Installed a n350x g4x plug n play on a nissan 350z but the ac stopped working]

2 hours ago, Adamw said:

The AC is being locked out due to "low pressure".  But, testing on the bench I think the problem is due to an error in our predefined pressure sensor calibration.  I have passed that on to the firmware team to take a look.  

In the meantime you can set it up with a user cal like below should fix it. 

ok will try that tomorrow and let you know the results, thanks again

[Installed a n350x g4x plug n play on a nissan 350z but the ac stopped working]

On 11/23/2021 at 2:28 AM, Adamw said:

Can you do a short log of the engine running and you switching the AC on/off a couple of times.

here are the files

PC Datalog - 2021-11-23 4;56;23 pm.llgx Andrew Red 350Z Test.pclx

[Installed a n350x g4x plug n play on a nissan 350z but the ac stopped working]

need help getting my ac working on a 350z with a n350x g4x plug and play, was working with the factory ecu but i hasn't worked since installing the ecu. attached is a pic of the ac options

[1NZ-FE G4X Monsoon TRD Vitz Turbo]

On 7/27/2021 at 8:16 PM, LIEW DA YING said:

Is this using e throttle? 

no it came with a regular cable throttle body

[G4+ monsoon 3sge black top with ITB's]

Done Something similar could help you get started

[1NZ-FE G4X Monsoon TRD Vitz Turbo]

[Nissan 350Z G4+ Extreme Plug & Play Dyno Tuned 251whp]

dyno tuned made 251whp 259tq engine is completely stock