[Atom no connection to the PCs]

13 hours ago, Simon said:

On the Atom you don't have the same issue as there is no serial output.  (assuming atom II) 

I would initially start by powering the ECU on the bench and then see if you can connect.

I turn off ECU wire which was going to the engine ,  I'm trying to connect by giving the power to ECU and plugging usb to laptop , it still don't connects .... ???? 

[Atom no connection to the PCs]

On 5/16/2018 at 6:18 AM, Adamw said:

It is not CAN that effects the PC Comms, you likely have an old CANDASH cable which has serial wires inside also - the serial wires will interrupt the PC Comms since that is how the PC talks to the ECU.  If you cut that cable down so the serial wires are less than about 200mm and only connect the CAN wires then you will be ok.

 

 

Hello , How you fix that problem ? I have same problem.

 I have a problem with LINK G4+ Atom. There have no connection to the PCs but the ECU is working. The error is "Unable to connect to the ECU but USB connection is present. Please cycle the power to the ECU.

Please help!!

 

[email protected]