[How to check what temp the fan switches on at]

ok and how do i do this?

that would be great thank you 

[How to check what temp the fan switches on at]

Can you do this even if there is a password?

how do u get the ecu settings up?

[How to check what temp the fan switches on at]

Hi there

Was woundering how you check what temp the tuner has set the fans to switch on?

i had my lap top hocked up to it today and i couldnt seem to find it, im not 100% sure but yhe tuner may hve put a password/lock on it which would mean i couldnt see it? Or find it?

the obvious way would be to run the car an see when or see if they turn on but i dont wanna risk any overheating etc

[g4 link boost controller connected makes it free boost]

thats ok dave have sent you a email now, sorry if it seems rushed at work at the moment! haha thanks

[g4 link boost controller connected makes it free boost]

Hi there dave i have now emailed you, thank you simon for your input as well

thanks  

[g4 link boost controller connected makes it free boost]

Ok thank you, dam this is starting to be tricky case

ok how do i capture the log?

just a thought, i did have to change a metal washer on the top port of the waste waste gate as i lost one, could it be possiable at all that it is to big and is not sealing the pressure there for the solinoed isnt getting enough pressure to open?

[g4 link boost controller connected makes it free boost]

have i attached the pcl file correctly?

thanks =)

[g4 link boost controller connected makes it free boost]

here it is hopfully i did it right

hope this helps

[g4 link boost controller connected makes it free boost]

hi there quick question on that, if ive only hocked my lap top up to it once just to test weather the boost solinoied works would it have saved the pcl file your talking about?

 

thanks

[g4 link boost controller connected makes it free boost]

hi there simon

ok firstly what is pcl file? and where can i find it

thanks =)

[g4 link boost controller connected makes it free boost]

hi there dave

so I hocked the lap top up and tested it and could hear and feel it working. what would you recommend doing next?

thanks

[g4 link boost controller connected makes it free boost]

hi there

when i dissconnect the plug for boost solonied it just boost on waste gate pressure. the waste gate it self has a 10psi spring, and the boost controller is set at 14psi.

 

yea ive never touched the software, ive got hocked up exactly like i had it before i took motor out etc, and ive even asked the local dyno shop if it plumbed up correctly and they have given me a diagrame as well.

my set up is

two ports coming off the intercooler pipe

*1st port goes striaght to the bottom of the waste gate

*2nd port from intercooler pipe goes to boost controller and then goes to the top of the waste gate, (port 3 on boost solonied vent to air.

 

thank you 

[g4 link boost controller connected makes it free boost]

Hi there

thats fine, yea i mean like if it wasnt for the boost cut it has, it would keep going

its ment to be only hitting 14psi on the boost controller, but it hits over 20psi untill it hits boost cut

any help would be great David

[g4 link boost controller connected makes it free boost]

So i tried what you said, unplug electrically and see what the boost does.

when i unplugged it it only made waste gate spring pressure

so does this tell you much?

[g4 link boost controller connected makes it free boost]

Ok what result am i looking for?

 

ive been running on just waste gate pressure by un hooking the top vac line off, and it holds waste gate pressure good if this awnsers ur questioN?

[g4 link boost controller connected makes it free boost]

hi there, b4 i took the motor out of my car the boost controller worked as it should when i re installed the motor (after the bottom end was rebuilt) when i hoocked the boost controller back up to the external waste gate the (same way as it was when it worked) it cause the the car to free boost 

ive tried a new boost solonied and did the same thing, i know there power going to the solnoied and i know its connected correctly, im woundering if any one has had a similair problem?, as its starting to sound more like a ecu issue

 

thanks, any help would be great!