subaru555asturias

No amplifier.... where I can buy one? Thanks.

Hi. I get one cheap sensor EGT Thermocouple Type:K Type (ungrounded) from ebay and cannot do it work in my ecu in An Temp 3 mode. Maybe with a cal table? What values I need?

I run v7 v9 pnp subaru ecu uptated to the last firmware and i dont see how manage the als using the egt as limit.... only see the ect. Help?

My email is [email protected]

Well.... I did the firmware update and reconfigure the ALS but I dont have ALS effects. Obviously I'm a Beginner in ecu tuning and I get the help of a friend that is professional tuner but he lives at 7000 kms from me jeje. The isc valve opens and the rpms up to 3500 4000 but dont get ALS effects ( some boost or bangs at the exhaust) Also I get a problem with the boost, the car runs with the wastegate standard boost 0.7 bar. I test the solenoid with the output test of the vipec and it sounds. And the wastegate opens if I put it 0.7 bar with a air pump... :shock: This is the actual map mapa2.pcl

Thanks for your fast reply. I get a Volkswagen idle valve for the ALS. For the next year I will mount a EGR system for it. In a few hours I will update the firmware and check the ALS MODE 1.

Of course paltunin aversi.pcl

Hi everyone. Im the owner of a v2 impreza. I run a vipec v7-v9 pnp impreza ecu with the pinout adapted to my ecu wiring. The ecu worked right at the dyno and the ALS and LC worked also fine. The first time that I drove the car I found a little misfire at 2500 rpm when I leave the pedal from the accelerator. Now, with the car stop and the engine runs, I get misfires at 2000rpm, The ALS interruptor OFF and ON is the same thing. Also, with the interruptor On or Off the ALS dont works. I find that the idle cicle is managed to 2000rpm and the misfires are a 2000 rpm. If I change the idle cicle to 2500rpm I get the misfires at this rpms. Always, if the ALS interruptor are On or Off is the same thing and the ALS dont works. Remember that the ALS worked fine at the dyno and some days after. The LC works fine always from the dyno day. I need your help.