Jump to content

zilvia444

Members
  • Content Count

    11
  • Joined

  • Last visited

About zilvia444

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello I have a 1jz gte with a link g4+ xtreme . I'm a bit confused about the injection rate setting for a multiple-group injection mode . in my understanding we should have 6 injection events in 1 operating cycle in a 6 cylinders engine. so for a wasted injection mode every injector drive assigned should be activated every 360 degrees ?? Thank you in advance
  2. Thank you for your help ill try the trigger set up tomorrow i think this is the problem the trigger mode i appreciate your help
  3. hello i did all the above the engine isn't starting do you think the problem is in the trigger setup ? Thank you for your help i really appreciate it . the fuel and ignition tables are still untouched i got this base file from the link base maps library i only changed the injectors and ignition mode + tps ,map , ECT and TRIGGERS. The engine bay is still incomplete . there is no radiator nor intercooler .. my goal for now is to start the engine successfully . Thank you in advance .
  4. hello i terminated the ignition and injector outputs as you listed above , the engine did not start and it was back firing ? after changing the wiring to 1 5 3 6 2 4 the engine started but sound like a 2 stock engine ? i am really confused . this is the file am running link start up.pclr
  5. Hello Thank you all for your replies The engine started today after correcting the firing order The coiills where set in the wrong order. My bad But the engine sound like a lawn mower ? The firirng order is set in the following order: 1 5 3 6 2 4 coil 1 to spark 1. coil 2 to spark 5. coil 3 to spark 3 . coil 4 to spark 6 . coil 5 to spark 2 and 6 to spark 4 Same wiring for the injectors Ill upload my file Thank you in advance
  6. Hello today i purchased 6 toyota yaris coils and installed it with the correct wiring . I tried to start the engine . it failed to start. ignition setup is correct . i did an ignition test , everything seems to be working correcty. i did a trigger calibration. Firing order is correct NB : the engine was starting fine on wasted spark Thank you in advance
  7. thank for your reply what about the trigger calibration ? should it be redone?
  8. is it TOYOTA SUPRA IV G4 PLUS file?
  9. helloI need a base file for start up Engine 2jz gte vvti it has siemens deka 860 cc injectors wasted spark single turbo. Thank you in advance.
  10. HELLO I need a base file for start up Engine 2jz gte vvti it has siemens deka 860 cc injectors wasted spark single turbo. Thank you in advance.
×
×
  • Create New...