chris12at
Members-
Posts
5 -
Joined
-
Last visited
chris12at's Achievements
Newbie (1/14)
0
Reputation
-
Hi Adam, Thanks I will parallel the wiring for the secondaries I will look to get a cranking log when I am next able to get to the car. I do have synchronisation with good spark triggering and fuel pump activation. The fuel system is pressurised but so far the plugs are dry. I had the feeling that this was injector setting related and that they were potentially not being switched appropriatel?
-
Hi, I am at the end of an install into a track focussed RX7 with a Link Fury and need some help with a few settings; I have spark but currently no fuel. Specs; 2 rotor 13b with sequential 6 speed Elite gearbox 2 x primary ANSU 90/550 injectors 4 x secondary injectors ANSU 90/550 injectors 4 x AEM ignition coils I am looking for some assistance around Injector settings, the injectors are 11 ohms, I have set it to sequential/staged but currently gives 4 injectors. What do I need to do to add the extra injectors and what settings do I need? I am sure I will need lots more help but would appreciate any assistance to get it running.
-
thanks all, I will try and report back
-
Hi having some real issues getting the car to start when cold, it seems to flood out extremely quickly. once running she runs well albeit a bit on the rich side. standard 12at injectors (800cc) I have attached the current map, any help much appreciated thanks chris nov 14 2016.pclr
-
Hi, Following some teething problems I am now up and running with my Atom on a new installation of a 12a turbo into a Mazda Rx3. Can anyone assist with settings to run only primary injectors?