Angelo Posted August 5, 2019 Report Share Posted August 5, 2019 Hi guys i am running g4+ extreme and i was wondering can i connect an LED to any of the outputs on it and use it as an indicator everytime the ecu detects a knock signal? And how can it be done if possible? Do i need to add a script somewhere maybe? Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted August 5, 2019 Report Share Posted August 5, 2019 Set up a Virtual Aux to turn on when knock level exceeds your chosen threshold, and then set an Aux out to turn on when the Virtual Aux is active. HTH, Richard. Angelo 1 Quote Link to comment Share on other sites More sharing options...
Angelo Posted August 6, 2019 Author Report Share Posted August 6, 2019 Nice i didn't knowbwe had so many options other then the listed ones thanks man appreciate it now i can add a knock and oil temp and fuel pressure indicators using this thanks a lot Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted August 6, 2019 Report Share Posted August 6, 2019 No problem, you don't have to use a virtual Aux for many of the functions but it helps for stacking conditions (especially on igniter and injector outputs which don't have as many) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.