Guest Anonymous Posted April 12, 2009 Report Share Posted April 12, 2009 Hi Ray, I've just taken delivery of my V88 (serial # 4569), and am wondering what is the best way to run 12 injectors? (batchfire, sequential but with 2 injectors on each channel, staged etc etc??) The motor is as follows- 1FZ-FE landcruiser 4.5L DOHC 6cyl (full house build) PT-101 turbo (101mm inducer) Manifold has locations for 2 injectors per runner Injectors are Bosch 'indy blue' 1600cc Methanol fuel with mechanical pump M&W Pro Drag CDI The set-up is aimed at outright HP. Cheers! Sean Quote Link to comment Share on other sites More sharing options...
rayhall Posted April 12, 2009 Report Share Posted April 12, 2009 Sean, You can connect two injectors per injector output and run sequential. If you want staged injection then select Sequential/Staged. The six primary injectors are connected to injector outputs 1 to 6. The six secondary stage injectors are connected to injector 7 and 8 outputs in pairs of three injectors. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted April 12, 2009 Report Share Posted April 12, 2009 Ah - magic. I was hoping that I could run 6cyl sequential + 2 x 3cyl batchfire but I couldn't interpret from the manual if it was possible. How well it will idle on 1600cc injectors is yet to be seen though...... Thanks Ray. Quote Link to comment Share on other sites More sharing options...
rayhall Posted April 12, 2009 Report Share Posted April 12, 2009 Sean, On methanol it will idle without problems on one 160lb injector. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.