[knock link light G4]

Hi Guys,
Is it possible to connect 2 knock sensors to knocklink light G4?

im already using it with one knock sensor with 4 cly engine but im thinking of using it with V6 and V8 engine and i wounder if it can work with 2 sensors.
or does one sensor is enough for v6 and v8 .

 

Thank you in advance 

 

[knocklink light g4]

Hi gain,

I installed it next to oem knock sensor which is the prefect place for it.

it work fine and it flash if the coolant temp is high toward the H side also it detect some knock which is good.

but sometime it flash while im rolling at wot and if i do another test it does not flash again without changing anything.and that confusing me.

what i usually do i do retard the timing a bit and i do another test and then i advance it to see if still knocking or that was just a flash.

it happened from time to time but not alot maybe once every 2 days.

The question is what might be the issue or what can cause that ?

Also how can i knew if the flash was because of the sensor detect a knock ?

 

[knocklink light g4]

Thank you Shedley ..

[knocklink light g4]

Hi,

I just bought knocklink light g4  with knock sensor & loom full kit and i would like to know some location of the senor to be installed to make sure it is deduct noise.

first of all i can't install it next to the stock knock sensor as it needs to move some parts like drive shaft from down the car or the intake manifold.

so i found 2 places  the first one is on the caver of the engine valve at right side and the lift side , 2nd above the headers around 1cm there is a hole  ( under the join of the block with the head )

but im afraid that the heat of the header might damage the sensor 

It's suzuki 4cly engine 

Also is there is a tips how to test if there is knock or no with stock ecu