Jump to content

Srdat1600

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by Srdat1600

  2. G4x lambda link command error

    in G4x

    Posted

    23 minutes ago, Adamw said:

    No, that is the PC Link version (software on your laptop), firmware is the code inside the ecu.  To see firmware version go to >help>ecu information.  6.17.8 is the current.

    Look like this is it.

    Where do i find the updated firmware

    Thanks once again adamw

     

    1596193168226665241540188105986.jpg

  5. Fault code 76. Dbw ethrottle tps tracking error

    in G4x

    Posted

    8 hours ago, Adamw said:

    76 is TP sub/main tracking error.  Since it happens as soon as you switch on the safeties I would say it is the TPS (Sub) 100% setting.  

    Make sure it is set to 100% if both sensors move all the way to 100% or if they dont then set it to whatever value of TP main the TP sub stops increasing.

    I7Fze9I.png

    Hi adam.

    Your a genius and absolutely 100 percent correct. One was set to 0 percent.

    Amazing. Thank you.

  6. Fault code 76. Dbw ethrottle tps tracking error

    in G4x

    Posted

    1 hour ago, Confused said:

    You'll need to post tune, plus PC logs capturing all parameters.

    The log should probably contain (at the least) it working "correctly" in Setup mode, with varying throttle positions, slow sweeps plus faster changes etc, and it going into ON mode and showing the fault.

    A comprehensive log file showing the issue will help you get some advice and a resolution quicker. :)

    Ill get it uploaded asap.

    Thank you

×
×
  • Create New...