86rotaryman
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by 86rotaryman
-
-
I'm trying to get an abs sensor on a Eunos Cosmo to send a speed signal to a G4+ xtreme which will then display on an Aim dash via can bus. I'm using DI 1 and have tried all sorts of settings but I'm just not getting any signal. The sensor is a 2 wire, I have grounded 1 wire and the other goes to the DI. I have tried abs sensors on different wheels but still no luck. What am i doing wrong? Thanks.
ABS sensor for wheel speed
in G4+
Posted
Thanks for the replies. I also thought the wheel speed could be too slow, so i took the car for a drive but still nothing.
I have tried grounding to chassis and also sensor ground. Im unsure what type the sensor is. I hooked it up to a multimeter and it creates a small mv reading near a metal object.
I might try a different DI channel tonight.